Graphite and Its Awesome Properties

Graphite and Its Awesome Properties

Hi. Graphite.
I like graphite! It’s a specific arrangement
of carbon atoms that is highly conductive. Which also allows us to draw. Graphite has many applications.
From pencils, to DC motor brushes, to some traces on electronics, to battery carbon rods,
and more. This is a replacement lead
of a mechanical pencil. It’s not made of lead, of course.
It’s carbon. The reason they call it lead
is the result of the same ignorance that resulted in calling the
North American natives “Indians.“ You know, those early explorers,
when they found America, they thought they were in India,
so they called them “Indian”. Later, British tried to fix it
by eliminating natives, which they failed. So they took over India,
and tried to turn them into British, which they failed. Now, we have to call
the real Indians… … East Indians, South Asian,
Asian Indian, or whatever, to avoid mixing them with natives, who were wrongfully accused of being Indian. Aaach! I wasn’t even involved! The point is that, people were originally using lead to draw. So when they discovered graphite, they thought it does the same thing, so it must also be an Indian. One important note – the element of lead is highly poisonous, and I hate it! It turns you into an idiot before it kills you. But I like graphite. Now let’s pass some current through the pencil lead. That way I can measure its resistance. Dogsh*t! Aah! Nowadays, everything blows up. Let’s try again. Wow! It lights up well! Now I’m running 1 amp and measuring voltage across around 1 centimeter, so for this particular piece, the resistance is 150 milliohms, across 1 centimeter. And this is how they make potentiometers. Let’s try 30 volt 10 amp. Just melted my alligator clip. Now, let’s kick it up a notch. I’m gonna run 10 amps through a regular pencil’s graphite. Wow! This is getting- Oh my god- Sh*t! @#$%! Whoa! @#$%&*%! @#$%*%#*@%&!*@#%@! Well see, the graphite gets super hot and burns the wood around it. But it doesn’t burn. That’s why it’s good for high temperature applications. Let’s run 10 amps through this graphite and see how much it glows. Yaaaaa! Look at this! Let me see if I can measure its temperature using my thermal camera. Wow, look at that! Right away it goes above the 330 degrees maximal- @#$%! By the way, I have four of these thermal cameras to give away at the end of my video. So these get very hot. Always wear safety gloves to protect your fingers, and don’t try this at home. Let me see if I can make some arcs. Muuuh sh*t! Always wear safety goggles when dealing with very bright arcs. Let’s try it again. Nice. Look at that! Nice. F*ck! Am I on fire?! (blow blow blow) I suppose using the gardening gloves is not the best idea. You can get carbon rods from a carbon zinc battery. Not an alkaline battery; its structure is different. Make sure it says “carbon zinc” or “heavy duty,” and it doesn’t say “alkaline” or “rechargeable.” First, you pull the cover off. Then you gently pull the battery rod out, while turning it like this. Now I have AA battery rods, D size battery rods, and some longer rods from my old 6 volt battery pack. And I have my supercapacitor bank. I doubled the number of capacitors so I can charge them to 30 volts that can deliver more than 200 amps. Let’s make some arcs now. Hey – my rods are burning? Aah sh*t! Goggles! Well, it wasn’t the rods apparently. It seems like there is some flux in them that eventually burns out. Let’s see if we can melt some copper with this. Look at that people! Molten- Ah sh*t! This glove is not good for this purpose! (blow blow blow) Good news to my supporters at, I have four of these Seek thermal cameras to give away. And if you’re interested to buy their products at, you can get a 20 percent discount with the promo code ElectroBOOM20 for a limited time. Are you watching Discovery Channel again?


    Me and my friends used to put mechanical pencil lead in the usb ports (back bottom corner) at school to see how hot it got. Man we fucked up a lot of computers

    Well Chernobly engineers thought it was a good idea to add graphite tips on the control rods but the reactor had other plans…….

    The real name of country India is Bharat. Both India and Hindu is the name imposed by invaders. And the religion Hinduism is also not real name in fact no scripture or Vedas of this religion have word Hindu in them. Because before invasion there was no such thing like religion there was sanatana dharma which means eternal duty or responsibility. And many people think that dharma = religion which is incorrect dharma is not religion.

    where as English where mostly Caucasian and they were wiped out by the Normans who were french, so your really mean french people, 🙂 am i to late for the give away ?

    So fun stuff that I hope some people would find interesting. Graphite electrodes are actually used in a metal cutting/gouging process called Carbon Arc Cutting (CAC). Take a graphite electrode and pressurized air with a heavy duty welding arc and it actually gouges the metal out and blows the slag away. The electrodes come in different shapes, like round and flat for depth and width. It's also used to gouge faulty welds out to go over them to either just make them look better or make them stronger. The graphite electrodes are usually coated in copper due to the oxidation that can build up from that kind of intense heat, and the process itself is very dangerous and very messy. Metal can actually get blown a significant distance, and it's very noisy and dirty.

    Let's all thank ElectroBOOM for reminding us Everything NOT TO DO when working with electricity, folks! Seriously though, thanks for doing this stuff so somebody else doesn't get hurt doing the same exact thing.


    Americans(not all) are the only people in the world who call red indians ‘indians’. As an Indian I say thank you for making people aware of this.

Leave a Reply

Your email address will not be published. Required fields are marked *