Create a fragment of the fence from the walls and the column with the head Then we’ll do it like this The head of the column is drawn with the element “Roof” and we translate it into the element “Morph” Please write your questions, wishes and comments under this video.
If you like our work, put LIKEs and subscribe to our channel (click on the medal at the bottom right). We group the column with the head and then it is already grouped with a fragment of the wall. For what it is, you will see later when placed on a curved surface. Draw the contour of the fence with the “Polyline” element. Create for example the curvature of the earth’s surface. It can be any relief. We measure the length of a fragment In the replication settings along the polyline, set the interval in accordance with the measured value, the base anchor point and that it must be rotated along the polyline. We in the settings have specified that the elements are broken up by the first level of grouping. That’s why the column with the head and the wall settled with intervals. It is necessary that the fragment is replicated as a whole. We perform the final fine-tuning of the fence to a reasonable kind This approach allows you to make fences of any shape and facilitates the calculation of materials When removing to the surface of the earth, we set the parameters for accounting for the grouping “according to the latest level of grouping.” This is so that the walls land separately, and the columns – along with their heads. (Otherwise the head would fall to the ground) We perform the final fine tuning of the fence to a resonable kind You can give vent to fantasies and build very beautiful fences in your projects For example, on the fragments of the walls, it would be possible to provide for decorative elements